Menu

 Testing Menu

VEG    bhjj                             Non Veg

👩💗💚


lndsufhd

Comments

Post a Comment

Popular posts from this blog

Simple Past Tenses

Image
Marks:- 10+5+5 Name of student: Subhendu Pal Faculty Name:  Suchitra Bhatt Roll No: 1503 Date: 10-02-2018 Session Name: Simple Past Tenses Simple Past Tenses :- With most verbs the past tense is formed by adding -ed: call >> called; like >> liked; want >> wanted; work >> worked But there are a lot of irregular past tenses in English. Use :- We use the past tense to talk about: something that happened  once in the past : I  met  my wife in 1983. We  went  to Spain for our holidays. They  got  home very late last night. something that happened  again and again in the past : When I was a boy I  walked  a mile to school every day. We  swam  a lot while we were on holiday. They always  enjoyed  visiting their friends. something that was  true for some time  in the past: I  lived  abroad for ten years. He  enjoyed  b...
Read more

Remote Connectivity

Image
 Marks: 10+5+3+1+1 Name of student: Subhendu Pal Faculty Name: Priya Sawant Roll No: JK-ENR-SW-1503 Date: 27-2-2018  Session Name: Components of Cisco Unified Communications Configuration Cisco IP phones using the software:- GNS IOS (router) Cisco configuration professional Vmware  Cisco IP Communicator Give IPs to Fast Ethernet & Serial Interface on both the Routers (Eg. R1 & R2) Also, Configure RIP on both routers. Configuration:- R1#clock set 12:57 27 FEB 2018 R1(config) Telephony-service R1(config) Max-dn 10 R1(config) Max-ephones 10 R1(config) ip source-address  R1(config) (Type the ip address of routers fast ethernet) R1(config) create cnf-files R1(config) do write R1(config) exit R1(config) username admin privilege 15 secret admin R1(config) exit R1# wr R1(config) ip http server R1(config) ip http secure-server R1(config) ip http authentication local (Note:- Same...
Read more

RIP v2 Configuration

Image
Marks:- 10+5 Name of student: Subhendu Pal Faculty Name: Priya Sawant  Roll No: 1503 Date: 30-01-2018 Session Name: RIP v2 Configuration Router 1 Configuration :- Router>en Router#conf t Router(config)#int s2/0 Router(config-if)#ip add 200.100.10.2 255.255.255.252 Router(config-if)#clock rate 64000 Router(config-if)#no shut %LINK-5-CHANGED: Interface Serial2/0, changed state to down Router(config-if)#exit Router(config)#int f0/0 Router(config-if)#ip add 192.168.10.1 255.255.255.0 Router(config-if)#no shut %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up Router(config-if)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 200.100.10.0 Router(config-router)#network 192.168.10.0 Router(config-router)#no auto-summary Router 2 Configuration :- Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int s2/0 Router(config-if)#ip add 2...
Read more