Remote Connectivity

•  Marks: 10+5+3+1+1
• Name of student: Subhendu Pal
• Faculty Name: Priya Sawant
• Roll No: JK-ENR-SW-1503
• Date: 27-2-2018 
• Session Name: Components of Cisco Unified Communications

Configuration Cisco IP phones using the software:-

• GNS
• IOS (router)
• Cisco configuration professional
• Vmware 
• Cisco IP Communicator

Give IPs to Fast Ethernet & Serial Interface on both the Routers (Eg. R1 & R2)

Also, Configure RIP on both routers.

Configuration:-

R1#clock set 12:57 27 FEB 2018
R1(config) Telephony-service
R1(config) Max-dn 10
R1(config) Max-ephones 10
R1(config) ip source-address 
R1(config) (Type the ip address of routers fast ethernet)
R1(config) create cnf-files
R1(config) do write
R1(config) exit
R1(config) username admin privilege 15 secret admin
R1(config) exit
R1# wr
R1(config) ip http server
R1(config) ip http secure-server
R1(config) ip http authentication local

(Note:- Same steps apply for R2 ie Router 2)

1. Right-click on Cisco configuration professional software
2. Run as Administrator
3. Click on cancel
4. Type IP address of router 1 then username & password (R1)
5. Type IP address of router 2 then username & password (R2)
6. Click OK
7. Click on Discover
8. Click on Configure
9. Expand Unified Communications
10. Select Unified Communications features
11. Click on edit
12. Select IP telephony
13. Select CUCME then click OK & then Discover
14. Expand users phones & extensions
15. Select Extensions
16. Select Create
17. Type in Primary number column "1001"
18. Type in description "Test 1"
19. Then OK & deliver
20. Select phones & users
21. Select Create
22. In phone model select "IP communicator"
23. Run as Administrator
24. Click on Menu
25. Select preferences
26. Select Network tab
27. In Device name copy MAC address
28. Select "use this tftp server"
29. In tftp server one type R1 fast ethernet IP addres)
30. Copy the MAC address of Cisco IP communicator
31. Then click OK 
32. Open internet explorer
33. In MAC address column paste the MAC address of IP phone
34. Select Extension & Add
35. Click OK, Yes & deliver
36. Expand dial plans
37. Select VoIP & click on create
38. In "dail peer number" type 6
39. In remote site type the R2 serial interface IP address
40. In "destination number" type 2...
41. Click OK & deliver

(Note:- Same steps apply for R2 ie Router 2)